F10-XY （2-axis） adopted CCD array sensor combined with pulse-driven laser light source. It is the ideal micrometer for the measurement of wire&tube from range 0.2 to 10mm with the accuracy of ±(0.0005+0.01%D). Thanks to no moving parts, the measurement is very accurate over a long service life.
Features
1. CCD array sensor combined with pulse-driven laser light source
2. Extremely short exposure time enables measurement accuracy is same on vibrating product
3. No moving parts and optical lens inside, measurement is accurate over a long service lifetime without making any calibration
4. Strong Industrial environmental adaptability, protection grade reaches to IP65
5. Production line Cp and CPK statisticTechnical parameters
Parameters
| Part No. | F10-XY | ||||
| Measurements/sec | 1000(1-axis ：500） | ||||
| Measurement range | 0.2~10mm | ||||
| Repeatability | ±0.1μm | ||||
| Accuracy | ±0.5μm±0.01%*D | ||||
| Dimensional | 155 x 140 x 58mm | ||||
| Power supply | 24V ±10% 40VA | ||||
| Working temperature | 5~50 ℃ | ||||
| Storage temperature | 0~60℃ | ||||
| Relative humidity | Maximum 95%, no condensation | ||||
| Display | LED display | ||||
| Communication interface | Standard: RS485 Modbus-RTU,CAN Option: WIFI,EtherCAT | ||||
| Electrical port | Standard:digital output(relay),digital input,pulse line speed input Option:PI feedback control ,analog output | ||||
| Data collection and analysis | support(option DS14ZTDisplaycontrolsystem) | ||||
| Out-of-tolerance | Available | ||||
| Measurement mode | Transparent/non-transparent | ||||